Publicité
Install knob-style handle
Slide the handle onto the frame then secure
it with the included knobs and bolts.
Assemble the spray gun
WARNING! The threads on the lance and gun coupler can be easily cross threaded resulting
in an improper assembly. An improper assembly of the gun and lance can result in personal
injury. Do not use if the threads on the gun coupler and or lance are cross threaded.
Organize accessories
1.
Place the spray gun and lance
assembly into the holder on the
dashboard.
2.
Push
the
rubber
grommets
dashboard. Note: the dashboard
label indicates correct nozzle
placement.
3.
Hang the high-pressure hose on
the holder.
Page 8
ASSEMBLY
nozzles
into
the
on
the
1. Secure the lance to the gun by
carefully turning the coupler on the spray
gun until the coupler stops rotating. Do
not over tighten. Most of the threads on
the lance will not be visible if the lance
and gun are properly assembled. Be
careful not to cross-thread the gun and
lance.
3
2
1
Publicité
