VINCENT SV-400 Manuel D'utilisation page 25

1 2
1. POWER
This is the main power switch for turning on and
off the device. Please take note of the information
about "Power Control" in the sections "Instal la -
tion" and "Operating the device".
2. PHONES: headphones socket
If you want you can use this 6.3 mm jack socket
to plug in stereo headphones with an impedance
of at least 32Ω.
3. SELECT: Input Selector
One of the six audio sources connected to the
amplifier inputs can be selected for playback
here.
4. Display
The display shows track number, elapsed playing
time and other information.
FRONT VIEW
3
4
5
5. TONE: Volume keys
Bypasses the tone control that has been set with
the "TONE" (VOL+/VOL-) button.
6 7. VOL-/VOL+: Volume keys
/
These are the keys for the adjustment of the main
volume level of the system.
8. DIMMER: Brightness setting for the display
The brightness of the front panel display (4) can
be reduced in three steps using this button.
9. MUTE:
This button turns off the output signal at the
"Speaker Terminal" (15) and "PRE OUTPUT" (13).
8 7
6 9
Vincent Vincent
25 25