Publicité
Glass shelves
Vegetables drawer with manual humidity control
The drawer at the bottom of the refrigerator is intended for storing fruit and vegetables. It provides
humidity and prevents the food from drying out. The drawer has a humidity regulator which allows
setting the humidity level.
Description of the appliance
The shelves are made from safety glass. To change the height of a
shelf, lift the front of the shelf (1). Take hold of the back and pull the
shelf slightly forwards (2). Move the shelf to a higher or lower position
(3).
To remove a shelf from the refrigerator, lift the front of the shelf (4). Take
hold of the back and pull the shelf out of the appliance (5).
Slider position to the right: closed vents, higher humidity in the drawer
Slider position to the left: open vents, lower humidity in the drawer
INFORMATION!
If you observe droplets accumulating below the glass shelf, open
the vents and wipe the shelf.
To remove a drawer, pull out the drawer as far as it will go (1). Then, lift
the front part (2) and pull it out completely.
To insert a drawer, follow the reverse order (3 and 4).
15
Publicité
