Publicité
and return to Stand-by mode, otherwise after 10 seconds without action the device will automatically
return to stand-by mode as if it was the first time you use the device.
2. If the appliance is in operation and you want to change the time setting, press the
the same time to enter the time setting. Press
(1-7). Press the
or
automatically.
2. Press M
Press M button to toggle among the modes: Comfort mode
3 pre-set programs (P1 / P2 / P3), and Pilot wire mode P.
In Pilot wire mode P, set the heating using the external timer. When the external programmer is set to another
mode, the display shows:
External Mode Setting
Comfort mode
Comfort mode
Comfort mode
Economy mode
Anti-freeeze mode
Stand-by
mode
The 3 Preset programs are detailed below :
P 1
P 2
button to set the hours / minutes / day of the week. Press any button other than
to save the setting, otherwise after 10 seconds without the setting will be saved
Icon Displayed
-1
-2
Mon-Sun
weekdays
to toggle between hours / minutes / day of the week
,
Economy mode
EN-10
and
,
Anti-freeze mode
at
, the
Publicité
