Publicité
5 Operation
B. Repositioning and remapping
If the robot vacuum cleaner is relocated or significant changes are made in the environment, the robot
vacuum cleaner tries to reposition to adapt to the new environment and may create the relevant map
again. The details are as follows:
a. If repositioning is successful, the robot vacuum cleaner continues on cleaning;
b. If repositioning is unsuccessful, the robot vacuum cleaner starts over to scan in order to make the
mapping again.
A
WARNING: Ensure that the robot vacuum cleaner always
starts the cleaning operation from the charging dock.
During cleaning, do not intervene in the robot vacuum cleaner or change its location.
Room cleaning mode (Supported by the relevant mobile application only)
You may specify the rooms you want to be cleaned with the mobile application, then the robot vacuum
cleaner cleans only the room(s) that is/are marked in the map.
C
D
√A
√B
• The robot vacuum cleaner may also enter the areas other than the selected area after it starts clean-
ing; thus please remove the obstacles on the ground around the selected area. Area selection does
not provide a secure isolation.
• Regional cleaning may only be started after the robot vacuum cleaner successfully creates a map.
Regional cleaning mode (Supported by the relevant mobile application only)
X
Select regional cleaning mode in the application and then specify a cleaning area. The robot vacuum
cleaner only cleans the selected area and then returns to the charging dock.
• Regional cleaning may only be started after the robot vacuum cleaner successfully creates a map.
18 / EN
The dimensions of the region can be determined by
C
holding from the right bottom corner. In the meantime,
the dimensions of the displayed area are written on the
screen with the dotted line.
Robot Vacuum / User Manual
Publicité
