Publicité
5 Operation
Starting the cleaning
Press " " button to start the automatic cleaning mode. When it is started, the
robot vacuum cleaner is removed from the charging dock, performs an automatic
scan to create a map, determines the cleaning route in a smart way and divides the
area to several regions. The cleaning route is planned along the wall and the robot
vacuum cleaner moves forward and backward to clean different regions in order.
WARNING: If the charging level is too low, the cleaning
A
cannot be started. Please charge the appliance before
starting the cleaning.
WARNING: Before the cleaning, tidy up all cables to prevent
A
disconnections due to entanglement/pulling of the cables
and to prevent damage to the furniture.
WARNING: In the automatic cleaning mode, if the area to
A
be cleaned is less than 10 square meters, the cleaning is
performed twice as default.
WARNING: Do not move the charging dock or dust collection
A
station during cleaning and make sure that the station is
plugged; otherwise the robot vacuum cleaner may not be
able to return for recharging.
Pausing
Press " " button on the body to stop the robot vacuum cleaner while it is operating. The robot vacuum
cleaner switches to pause mode.
Automatic charging: The robot vacuum cleaner returns automatically to recharge after the cleaning
is completed.
Manual charging: The robot vacuum cleaner returns automatically to the charging station when you
press " " button on the upper body when it is in the pause position.
A. If the operation is paused, press " " button to recharge automatically.
B. If the robot vacuum cleaner is caught up anywhere and cannot find the charging dock, please move
the robot vacuum cleaner to the dust collection station yourself to allow it to be charged.
14 / EN
Robot Vacuum / User Manual
Publicité
