CLEAR WATER BACKFLUSH
•
After each coffee making session we
recommend doing a clear water backflush
before you turn off the machine. Empty drip
tray. Insert the cleaning disc into the filter
basket then insert the portafilter into the group
head. Press the 2 CUP button and allow
pressure to build for 20secs, then press to stop
and release pressure. Repeat this 5 times to
purge any fine coffee grounds and residual
coffee oils from the brew water paths.
CLEANING THE SHOWER SCREEN
•
The group head interior and shower screen
should be wiped with a damp cloth to remove
any ground coffee particles.
•
Periodically, run hot water through the group
head with the filter basket and portafilter in
place, but without ground coffee. This will
remove any residual ground coffee particles
from the shower screen.
CLEANING THE DRIP TRAY
•
The drip tray should be removed, emptied, and
cleaned at regular intervals, particularly when
the drip tray full indicator is visibly floating.
•
Remove the grid from the drip tray. Lift the
coffee grind separator and dispose of any
coffee grounds. The drip tray full indicator can
also be removed from the drip tray by pulling
upwards to release the side latches. Wash all
parts in warm soapy water with a soft cloth.
Rinse and dry thoroughly.
•
The storage tray can be removed and
cleaned with a soft, damp cloth (do not
use abrasive cleansers, pads or cloths
which can scratch the surface).
22
CLEANING THE OUTER HOUSING
& CUP WARMING TRAY
•
The outer housing and cup warming tray can
be cleaned with a soft, damp cloth. Polish
with a soft, dry cloth. Do not use abrasive
cleansers, pads or cloths which can scratch
the surface.
NOTE
Do not clean any of the parts or accessories
in the dishwasher.