Buttons - OHAUS a-AB33M1 Mode D'emploi

Analyzer and Bench Meter

1.4. Buttons

Up Button:
a) When setting parameters, press to increase the setting value or to display
the previous option.
b) When in setup menu, press to scroll up to the previous page of menu
selections.
c) When in calibration and PH electrode check system (PH ECS), press to
repeat the previous step.
Home Button:
a) Press to turn on the meter.
b) Press to start a new measurement.
c) Press to exit from the current mode or menu and return to the measurement
mode.
Down Button:
a) When setting parameters, press to decrease the setting value or to display
the next option.
b) When in setup menu, press to scroll down to the next page of menu
selections.
c) When in calibration and PH electrode check system (PH ECS), press to
move to the next step.
EN-7