Touch Screen - OHAUS a-AB33M1 Mode D'emploi

Analyzer and Bench Meter

1.3. Touch screen

1
9
10
11
1.
Date and time
2. Clock icon (a-AB41PH): appears when the timing function is used.
Note: this function is only available for a-AB41PH model.
3. Computer icon: appears when connects to a computer.
4.
Auto endpoint icon
5. Measurement icon: blinks when measurement is in progress.
6. Pinter icon: touch to print.
7. Calibration icon: touch to calibrate; blinks when calibration is in progress.
8. Menu icon: touch to enter menu settings.
9. PH electrode condition (a-AB33M1, a-AB33PH and a-AB41PH)
Slope: 95-105%
and offset: ± (0-15) mV.
Electrode condition is
good.
2 3 4
16
Figure 1-1 Touch screen
; Continuous reading icon
5 6
17
Slope: 90-95%
or offset: ± (15-35) mV.
Electrode condition is
acceptable.
7 8
18
.
Slope: less than 90%
or offset: ± (35-60) mV.
Electrode condition is not
good or needs cleaning.
EN-5
12
13
14
15