Publicité
OP 0309
PNEUMATIC FLOOR JACK 2T-3 STAGES
PUTTING INTO OPERATION
CONNECTION TO THE COMPRESSED AIR SYSTEM
- Compressed air enters into the jack circuit through the quick coupling on the top of the
manual lifting/descending controls; it is therefore necessary to have a connecting pipe
with a quick coupling compatible with that of the jack.
Check that the air supply pipe has a useful passage of at least 6 mm and it is not pinched
or restricted anywhere.
Working air pressure: 8 - 10 bar
- Absolutely never put the following into the compressed air circuit: hydraulic or Vaseline
oil, brake liquid, kerosene or other liquids.
- Install a filter dehumidifier-lubricator unit in the compressed air system.
- If you want to lubricate the compressed air circuit use exclusively:
AGIP OSO 100; MOBIL DTE 27; ESSO TERESSO 100; SHELL TELLUS 100; BP ENERGOL
HP 100
ACCESSORIES
The jack can be supplied with two extensions or height adaptors (long extension: 80mm,
short extension: 60mm.)
Never use more than two extensions! The manufacturer is not liable for any damage
resulting as a consequence of disregard for the above indications and the warranty
conditions are invalidated thereof!
SCRAPPING AND DISPOSAL
- The lubricants must be disposed of in compliance with the anti-pollution laws in force.
- Scrapping the jack and its component parts must be carried out by the user in accordance
with current laws.
Publicité
