Publicité
OP 0309
PNEUMATIC FLOOR JACK 2T-3 STAGES
FORWARD
Before using the jack, carefully read these instructions and become acquainted with the
safety symbols.
- This handbook is an integral part of the machine which must be kept safely and be
handy for the worker to consult whenever needed.
- The contents of this manual comply with Machine Directive 98/37 EEC and the jack is
type approved in conformity with the European Norm EN 1494 and following amendments.
- The manufacturing company reserves the right to make modifications without prior
notice and without incurring any sanctions whatsoever, without prejudice to the safety
and main technical characteristics.
- Failure to observe the instructions may cause personal injury, which in some cases may
be mortal.
- The manufacturer is not liable for any damage to things or injury to people caused by an
erroneous or incorrect use ofits product.
The identification plate is on the side of the casing.
SAFETY REGULATION
Only authorised personnel are allowed to use the equipment and they must know the
contents of this operating and maintenance handbook.
-The jack is an apparatus for lifting only and not for supporting,
it is therefore absoltely forbidden to work in any way under
the vehicle being lifted until it is placed on the relative stands.
DWG. 2
- Before starting to lift a vehicle it has to be blocked with the
parking brake and/or by putting wedges under the wheels, as
illustrated in figure DWG. 3
- If the vehicle is loaded check load stability when lifting.
Made in RPC
Publicité
