Publicité
6.2. UNLOCKING THE CONTROL PANEL (AUTO-LOCK)
The appliance is designed to automatically lock the Control Panel if no button is touched within
60 seconds. Only the
■
To unlock the Control Panel, touch and hold the
current settings will illuminate.
■
If you need to manually lock the Control Panel, touch and hold the
6.3. BASIC FUNCTIONS
1.
After setting up the appliance, plug the power cord to a suitable power outlet. The appliance
will turn on.
NOTE: The default volume and temperature settings after plugging in the appliance are "200ml"
and "A".
2.
To unlock the Control Panel, touch and hold the
3.
Place a cup (or suitable container) on the drip tray.
■
To set the desired dispensing temperature of the water, touch the Temperature button (1d),
when the button starts blinking, turn the Start/Cancel button (1a) clockwise or anti-clockwise
to select the desired temperature (A/45/55/65/75/85/100 °C). Then touch the Temperature
button (1d) again to save your selection.
To set the desired dispensing volume of the water, touch the Volume button (1c), when the
■
button starts blinking, turn the Start/Cancel button (1a) clockwise or anti-clockwise to select
the desired volume (200ml/300ml/600ml/1400ml). Then touch the Volume button (1c) again
to save your selection.
The 200ml or 300ml volumes are suitable for teas or coffees, and 600ml or 1400ml volumes
are suitable for instant soups, instant noodles, porridges, or other preparations.
4.
Press the Start/Cancel button (1a) to dispense water, the indicator will blink slowly. The
appliance will emit 3 quick beeps when dispensing is complete.
5.
If you need to stop dispensing water, press the Start/Cancel button (1a) again. The indicator
will blink quickly, the appliance will emit 3 countdown beeps and 3 quick beeps when
stopping.
6.4. CUSTOMISING THE DISPENSE VOLUME
The water dispensing volume can be customised according to your favourite cup or mug size
(adjustable volume range: 150 ml – 1400 ml).
1.
Place your favourite cup (or suitable container) on the drip tray.
2.
Touch and hold the Volume button (1c) for 3 seconds. The volume indications
(200ml/300ml/600ml/1400ml) will go off on the control panel.
3.
Press the Start/Cancel button (1a) twice to start dispensing water.
4.
Once the desired volume is dispensed, press the Start/Cancel button (1a) once to stop. The
indicator will blink quickly, the appliance will emit 3 quick beeps when stopping.
5.
Your customised volume will be saved automatically.
6.
To dispense your customised volume, press the Start/Cancel button (1a) once. Only the
temperature will be displayed when using a customised volume.
7.
You can set the temperature for your customised volume as usual.
■
To reset the dispense volume to the default value (200ml), touch and hold the
Volume button (1c) for 3 seconds.
NOTE: When the power cord is disconnected from the power outlet, all customised settings will be
reset to the default settings.
6.5. AUDIBLE FEEDBACK ON/OFF
The Start/Cancel button (1a) emits a beep each time that it is pressed or turned to select settings.
■
To deactivate (or reactivate) the audible feedback on the button/dial, touch and hold the
Temperature button (1d) and
button (1b) will be illuminated.
button for 3 seconds.
button for 3 seconds. The buttons and
button (1b) for 3 seconds.
9
button for 3 seconds.
EN
Publicité
