Publicité
38. WARNING: Improper use of the product may result in injury!
39. The heating element surface is subject to residual heat after
use.
40. CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the
utility.
2. TECHNICAL SPECIFICATIONS
Rated voltage:
Power consumption:
Dispensing temperature range:
Protection class:
3. PRODUCT DESCRIPTION
1.
Control Panel (touch buttons)
a.
Start/Cancel button
(2-in-1 dispensing button and
selection dial)
b.
Safety lock button
c.
Volume button
d.
Temperature button
e.
Temperature indication
4. BEFORE FIRST USE
1.
Remove all packaging materials.
2.
Check that the appliance has no visible damage and no parts are missing.
3.
Clean the appliance and accessories following the instructions in the CLEANING AND
CARE section.
4.
To flush the internal system of the appliance, fill the water tank with tap water up to the
MAX mark and dispense warm water until the water tank is empty, following the instructions
in the next sections.
5. SETTING UP
5.1. PLACEMENT
■
Place the appliance on a flat, dry, stable, and level surface.
■
Place the appliance away from the edge of the kitchen countertop to prevent children from
accidentally dispensing hot water.
■
WARNING: Never place the appliance on a tray where water spills can pool
underneath the appliance to avoid the dangers of electric shock.
220-240 V ~, 50-60 Hz
1930-2300 W
45-100 °C
Class I
2.
Dispensing nozzle
3.
Removable silicone drip tray cover
4.
Removable magnetic drip tray
5.
Water tank lid
6.
Removable funnel
7.
Removable water tank
8.
Filter cartridge
7
EN
Publicité
