Cool Mode; To Turn Off - Sharp CV-P09LX Manuel D'installation

COOL MODE

"CLOSE" position
1
Install the exhaust hose (See Page16), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
Drainage nozzle
with the stopcock.
Stopcock
1
Press the MODE button to select COOL
mode.
3
2
Press the POWER button to start op-
eration.
• The red OPERATION lamp on the unit will
3
Press the TEMPERATURE button to set
the desired temperature.
2
• The temperature can be set within the range
3
1
4
4
Press the FAN button to set the de-
sired fan speed.

TO TURN OFF

Press the POWER button again.
• The red OPERATION lamp on the unit will turn
off.
E-20
COOL DEHUM
light.
of 64°F to 86°F.
AUTO QUIET LOW
FAN VENT
HIGH