Parts Supplied; Cooktop Safety; Installation Requirements; Tools And Parts - KitchenAid KCED600GBL Instructions D'installation

Masquer les pouces Voir aussi pour KCED600GBL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
Tape measure
n
Flat-blade screwdriver
n
Phillips head screwdriver
n
Drill
n
Level
n
6" (15.2 cm) socket
n
extension

Parts supplied

Vent grille
n
Pre-filter
n
Plenum
n
2

COOKTOP SAFETY

Your safety and the safety of others are very important.

INSTALLATION REQUIREMENTS

Tools and Parts

Marker or pencil
n
Pliers
n
1/4" (6.4 mm) drill bit
n
Jigsaw
n
Ratchet with 3/8"
n
(9.5 mm) socket
1/4" (6.4 mm) nut driver
n
Plenum screw pack
n
Downdraft motor
n
assembly
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Parts needed
A UL Listed or CSA Approved strain relief for 7/8" (2.2 cm)
n
knockout.
A UL Listed or CSA Approved conduit connector for 1/2"
n
(1.3 cm) trade-size metal-clad conduit
UL Listed wire connectors
n
Metal ducting
n
Wall cap
n
6" (15.2 cm) Round Surface Wall Cap Damper Order Part
Number A406
3
/
" x 10" (8.3 cm x 25.4 cm) Surface Wall Cap Damper
1
4
Order Part Number A403
To order, see the "Assistance or Service" section of the Use
and Care Guide.
Vent clamps
n
Check local codes. Check existing electrical supply.
See the "Electrical Requirements" section.
It is recommended that all electrical connections be made
by a licensed, qualified electrical installer.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kced606gbl

Table des Matières