Publicité
How to reverse the door
TooI required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It's better that 2 people handle the unit during assembly.
1. Remove the 2 covers.
2. Remove the 2 screws, then remove the upper hinge that holds the door in place. Lift the door and
place it on a padded surface to prevent it from scratching.
3. Remove the screws and bottom hinge. Then remove the adjustable feet from both sides.
4. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
Publicité
