Publicité
fi nishing
EN
10.2
front hood installation
note:
This hood must be installed, if it has not already been factory installed.
A.
Safety door and barrier must be removed.
B.
Remove the securing screws from the top of the fi rebox, as shown.
C.
Install the front hood, ensuring it is angled downward when installed.
D.
Reinstall the previously removed securing screws.
f i r e - p a r t s . c o m
HOOD
48
W415-1848 / A / 03.11.19
SIDE VIEW
X5
Publicité
