Classification Of The Warnings En; Product Description; Technical Data En - Abicor Binzel WH Mode D'emploi

3 Product description

2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and are shown prior to potentially
dangerous work steps. Arranged in descending order of importance, they have the following meaning:
DANGER
Describes an imminent threatening danger. If this danger is not avoided, it will result in fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it can result in serious injury.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or the risk that the work may result in material damage to the equipment.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.
3.1 Technical data
Ambient temperature
Relative humidity
Tab. 1 Ambient conditions during operation
Storage in a closed environment, ambient temperature
Ambient temperature for transport
Relative humidity
Tab. 2 Ambient conditions for shipment and storage
NOTICE
• Since the version of the Alignment jig depends on the torch type used, no technical data are listed here.
EN - 4
Alignment jig
- 10 °C to + 40 °C
up to 90 % at 20 °C
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up 90 % at 20 °C
BAL.0022 • 2019-04-23