Identification; Marking; Safety; Designated Use En - Abicor Binzel WH Mode D'emploi

Alignment jig

1 Identification

The alignment (bending angle) of the changeable torch necks outside of the welding cell can be checked using the alignment
jig. Furthermore, it is also possible to realign the torch neck slightly with identical clamping, for example after a collision.
These operating instructions describe the handling of the alignment jig. Handling and description of this device are the same
for all torches with exception of the torch neck fastening. The Alignment jig may only be operated using original
ABICOR BINZEL spare parts.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding marking has
been affixed to the product, if required.

2 Safety

The enclosed safety instructions must be observed.
2.1 Designated use
• The device described in these instructions may be used only for the purpose described in these instructions in the manner
described. In doing so, observe the operating, maintenance and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.
2.2 Obligations of the operator
• Only the following personnel may work on the device:
• those who are familiar with the basic regulations and accident prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• those who have read and understood the chapter entitled "Safety Instructions";
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training, knowledge, and experience.
• Keep other people out of the work area.
• Please observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention.
2.3 Personal protective equipment (PPE)
To avoid danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves, and safety shoes.
BAL.0022 • 2019-04-23
1 Identification
EN - 3