Publicité
GB
Alternating current voltage / A=
Set the rotary switch to the appropriate range. Con-
nect the black test lead to the "COM" socket and the
red test lead to the mA / 10A socket (opens automat-
ically to suit the measuring range). Connect the test
Direct current
Measuring range
2 mA
20 mA
200 mA
10 A*
*)
To protect the product from overheating, after max. 10 seconds of measure-
ments, allow a pause of 15 minutes for cooling.
• Overload protection: mA range protected by a 200
mA self-resetting fuse.
• 10A range is protected by F 10 A / 1000 V.
• In the 10A range, observe the maximum switch-
on period!
Alternating current
Measuring range
2 mA
200 mA
10 A*
*)
To protect the product from overheating, after max. 10 seconds of measure-
ments, allow a pause of 15 minutes for cooling.
• Overload protection: mA range protected by a 200
mA self-resetting fuse.
• 10A range is protected by F 10 A / 1000 V.
• In the 10A range observe the maximum switch-on
period!
Measuring range
2 nF
20 nF
200 nF
2 µF
20 nF
WARNING! Risk of injury! Discharge the
condensers before each measurement.
Measuring range
200 Ω
2 kΩ
20 kΩ
200 kΩ
2 MΩ
20 MΩ
• Voltage to be measured: 0.25 V
28
Resolution
1 µA
0.01 mA
0.1 mA
0.01 A
Resolution
1 µA
0.1 mA
0.01 A
Resolution
1 pF
10 pF
0.1 nF
1 nF
10 nF
Resolution
0.1 Ω
1 Ω
10 Ω
100 Ω
1 kΩ
0.01 MΩ
leads to the test object. Read off measured result
from the display. The current direction is also dis-
played using signs.
NOTICE! Risk of product damage! With a
current over 200 mA, the "10 A" socket must
be used for measurements!
Accuracy
± 1.0 % v.M. + 3 digit
± 1.0 % v.M. + 3 digit
± 1.5 % v.M. + 5 digit
± 2.0 % v.M. + 10 digit
Alternating current voltage / A~
Set the rotary switch to the appropriate range. Con-
nect the black test lead to the "COM" socket and the
red test lead to the mA / 10A socket (opens automat-
ically to suit the measuring range). Connect the test
leads to the test object. Read off measured result
from the display.
NOTICE! Risk of product damage! With a
current over 200 mA, the "10 A" socket must
be used for measurements!
Accuracy
± 1.2 % v.M. + 5 digit
± 2.0 % v.M. + 5 digit
± 3.0 % v.M. + 10 digit
• Frequency range: 40-400 Hz.
Capacity measurement / F
Set the rotary switch to the appropriate range. Con-
nect the black test lead to the "COM" socket and the
red test lead to the V/Ω/TEMP/CAP socket. Connect
the test leads to the test object. Read off measured
result from the display.
Resistance measurement / Ω
Set the rotary switch to the appropriate range. Con-
nect the black test lead to the "COM" socket and the
red test lead to the V/Ω/TEMP/CAP socket. Connect
the test leads to the test object. Read off measured
result from the display.
Accuracy
± 1 % + 5 digit
± 1 % + 5 digit
± 1.8 % + 5 digit
Accuracy
± 4 % + 3 digit
Publicité
