Publicité
• If the power cable is damaged immediately dis-
connect the plug. Never use the device if the
power cable is damaged.
• If the device is not in use make sure the plug is
pulled out.
• Make sure that the device is switched off before
plugging in the mains cable.
• Make sure that the device is switched off before
unplugging it.
• Disconnect the power supply before transporting
the device.
• If the power connection cable of this device is
damaged, it must be replaced by the manufac-
turer or the manufacturer's customer service
department or a similarly qualified person in order
to prevent risks.
Device-specific safety instructions
• The cutting or modification of the power cable is
not permitted and will void the guarantee!
• Extension cables must not be used.
• Disconnect the mains plug before all work on the
appliance.
• Do not install and switch on the appliance if there
are people or animals in the medium being
pumped (e. g. a swimming pool), or they are in
contact with it.
• Children and young people under the age of 16
years must not use this appliance, and must be
kept away from it when it is in operation.
• Do not leave the unit unattended. If leaving it for
any period of time, unplug.
• Repairs must be carried out only by a qualified
electrician. If repairs are carried out incorrectly,
there is a danger of liquid penetrating into the
electrical components of the appliance.
Hose diameter
Hose connections of the uni-
versal adapter
A
B
Hose connection
13 mm (½")
15 mm (⅝")
19 mm (¾")
A
Disconnect topmost hose
connection at [A].
• Symbols affixed to your tools may not be removed
or covered. Information on the device that is no
longer legible must be replaced immediately.
Read and observe the operating instruc-
tions before commissioning.
Your appliance at a glance
Note: The actual appearance of your device
may differ from the illustrations.
► P. 3, fig. 1
1. Carrying handle
2. Mains cable and plug
3. Hose adapter for pressure connection
4. Elbow
5. Suction openings
6. Float switch
7. Bottom pressure connection
8. Top pressure connection
What is included
• Submersible pump
• Instructions for use
Operation
Installation and commissioning
Attach a sufficiently long and strong rope to the han-
dle before first use. The pump is submerged into the
liquid on this holding rope and can also be carried
with it as well as with the handle.
Note: In the case of continuous use of the
pump with the rope, the condition of the rope
must be checked regularly as it can decay
and break over time.
Connect pressure pipe
25 mm (1")
No not disconnect any
hose connection.
GB
38 mm (1½")
B
Disconnect both upper
hose connections at [B].
25
Publicité
