OM 0701N
1. Do not exceed the maximum capacity of 500 Kgs.
2. Use only on hard level surface.
3. Never attempt to move loaded stand across oors having
cracks or other obstacles which might impede
movement of wheels.
4. Never work directly under a supported engine.
5. Be sure load and stand are stable.
6. Periodically inspect stand to insure its safe operation.
7. Failure to follow any of these instructions may result in
property damage and/or personal injury.
Assemble the 4 wheels
Install the 4 jaws on the black
disk with the hexagon screws
ENGINE SUPPORT 500KG+FLUID RECOVERY TANK
CAUTION
ASSEMBLY
The upper part and the lower part are respectively
installed on the corresponding hole position
Insert the handwheel into the round
steel and use pin to thighten
Put on the oil collecting pan