Publicité
5 .1 .12 Quick-release bit remove tool is optional
for easy removal of the drill bit .
5 .1 .13 Tie rod wing nut (in optional anchoring kit)
is a large wing-shaped nut with washer . It can be
used together with an expansion anchor bolt to fix
the drill stand to the surface .
5 .1 .14 When perform a wall drill with stand,
always fix the s tand securely to the wall first,
then mount the drill motor next .
6. DECLARATION OF CONFORMITY
We declare under our sole responsibility that our drill stand s
model: COLONNA 200 and COLONNA 250 conform with following
standards or standardization documents:
in accordance to the regulations of directive 2006/42/EC .
The head of development is authorised to write the technical documents .
These are available from:
Maxima S .p .A .
Via Matteotti, 6
42028 Poviglio (Re)
Poviglio, 01 .01 .2024
COLUMN 200 - COLUMN 250
35
President
p .i . Mirco Dall'Olio
I T
EN
FR
Publicité
