Publicité
ENGLISH
-
WARNING! Regularly check the condition of components or parts subject to wear or
fatigue, such as the main frame, fork, wheels, brakes, etc. This will allow you to detect
cracks or damage in high-stress areas that may indicate the component's service life has
been exceeded and it needs to be replaced. Regular maintenance of the electric scooter
and its components will extend its service life. Periodically check the tightness of the
bolted parts, especially the wheel axles, the folding mechanism, the steering system, and
the braking system.
-
Contact the retailer to be referred to an appropriate training organisation.
-
Avoid high traffic or overcrowded areas and anticipate your path and speed by respecting
the traffic code and watching out for pedestrians on pavements.
-
Make sure pedestrians/cyclists are aware of your nearby presence upon approach when
you are not seen and/or heard. Remember to cross protected areas on foot and in all
situations take care of yourself and others. Remove any sharp edges that may have been
caused by the use of the vehicle.
-
Use the vehicle only for its intended purpose. This vehicle is not designed for stunt use.
2. PARTS AND COMPONENTS
Fig. 22
1. Throttle
2. Display
3. Brake lever and bell
4. Handlebar grips
5. Headlights
6. Stem
7. Folding mechanism
8. Front fender
9. Rear wheel/motor
10. Footrest
11. Taillight
12. Rear fender
13. Front disc brake
14. Kickstand (Parking device)
Fig. 23
1. Light
2. Drive mode
3. Speed indicator light
4. Configuration mode
5. Lock system
74
ORIGINAL MANUAL
Publicité
