Publicité
EN
7.1
INSTALL THE BATTERY PACK
•
If the battery pack or charger is damaged, replace
the battery pack or the charger.
•
Stop the machine and wait until the motor stops
before you install or remove the battery pack.
•
Read, know, and follow the instructions in the
battery and charger manual.
1. Open the battery door.
2. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment
until the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
For security reasons, some models have a security
key. The motor starts only when you put in the safety
key.
7.2
START THE MACHINE
1. Push and hold the start button (1).
2. While you hold the start button (1), pull the bail
switch (2) in the direction of the handle bar.
WARNING
NOTE
English
2
1
3. Once the machine has started you can release the
start button (1).
7.3
STOP THE MACHINE
1. Release the bail switch to stop the machine.
Wait until the blades fully stop before you start the
machine again. Do not quickly turn the machine off
and on.
Always remove the safety key and battery pack after
you complete the work.
7.4
REMOVE THE BATTERY PACK
1. Open the battery door.
2. Remove the safety key.
3. Push and hold the battery release button (1).
10
WARNING
WARNING
1
Publicité
