Publicité
Towel dryer position :
The installation of the appliance in a bathroom is IMPERATIVELY carried out in volume 2 or out of
volume according to the NFC 15-100. If necessary, ask for the assistance of a qualified electrician.
The volumes illustrated in the NFC 15-100 standard are defined in relation to a bathtub or shower
tray, whatever the room. Other appliances (washbasins, bidets, sinks and other water points) are not
concerned.
Choose a suitable location for the towel warmer.
It must be firmly fixed to the wall.
The appliance must never be used upside down, at an angle or at 90°. It must be mounted parallel to
the wall (the wall must be vertical to the floor).
It is imperative that it is positioned with the control box on the top right. The precision of the regula-
tion makes the radiator sensitive to influences, air intake, cold tiles etc. It is therefore important to
determine the correct location.
The radiator should not be placed directly below a fixed socket.
Fix the wall brackets to a strong, flat wall using screws and plugs suitable for the type of wall (see Fig.3).
The screws and dowels supplied are suitable for solid wall brackets.
Observe the minimum distances to obstacles (see Fig.1).
Element
1
2
3
4
5
6
7
8
9
10
Designation
Towel dryer
Cap
Screw
Plot
Tube
Square washer
Locking screw
Sleeve
Fixing screw
Dowel
15
Quantity
1
4
4
4
4
4
4
4
4
4
Publicité
