Publicité
• Keep the workplace clean. Mixed contamina-
tion by different substances is particularly danger-
ous. Light metal dust (e.g. aluminium) can easily
ignite or explode.
• Do not use the electrical tool with a damaged
cable. Never touch a damaged cable and
immediately pull out the plug. Damaged
cables increase the risk of electric shock.
• Avoid overheating the device and workpiece.
Excess heat can damage both tool and product.
• Keep the handles dry and free from grease.
Slippery handles can cause accidents.
• Always heed the applicable national and inter-
national safety, health and labour regula-
tions. Before commencing work, inform yourself
regarding the regulations valid at the location
where the product is to be used.
• Remember that moving parts may also be located
behind ventilation and venting slots.
• Remember that moving parts may also be located
behind ventilation and venting slots.
Dust extraction
Dusts from materials such as lead-containing paint,
some types of wood, minerals and metal may be
harmful to health. Touching of inhaling the dusts can
cause allergic reactions and/or ailments of the res-
piratory tract of the user or persons in the vicinity.
Certain dusts such as oak or beech dust are consid-
ered carcinogenic, particularly in combination with
wood treatment additives (chromate, wood preserva-
tives). Materials containing asbestos may only be
processed by experts.
– Always use a dust extraction facility.
– Make sure the workplace is well ventilated.
– Always wear a dust protection mask.
– Observe the regulations valid in your country for
the materials to be processed.
Risks caused by vibrations
CAUTION! Risk of injury due to vibra-
tions! Vibrations may, in particular for per-
sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symptoms,
stop working immediately and consult a doc-
tor. Numbness of body parts, loss of sense
of feeling, itching, pins and needles, pain,
changes in skin colour.
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from these
as a result of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
• Symbols appearing on your product may not be
removed or covered. Information on the product
that are no longer legible must be replaced imme-
diately.
Read and observe the operating instruc-
tions before commissioning.
DANGER! Risk of death through electric
shock! The use of this variant outside Swit-
zerland is not permissible for safety rea-
sons, as this poses a risk of electric shock or
fire.
The variant of the product sold in Switzerland may
only be used in Switzerland, as it is equipped with a
Swiss plug.
You can identify the variant by means of the item
number on the product (the instructions always con-
tain all item numbers):
• Item number Switzerland: 382263
• Item number in other EU countries: 380393
Personal safety equipment
Wear a dust protection mask when the
work develops a lot of dust.
Wear protective glasses when using abrad-
ing equipment.
Wear ear defenders when working with the
device.
Your machine at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► P. 3, fig. 1
1. On-Off switch
2. Rotational speed controller
3. Connecting pieces
4. Sanding plate
Scope of supply
• Random orbital sander
• Dust container
• Sanding discs (3×)
• Instructions for use
• Adapter for a vacuum
Commissioning
Fitting the sanding sheet
Note: Both perforated and unperforated
sanding sheets can be used. Dimensions:
► Technical data – p. 27
Note: Position perforated sanding sheets so
that the holes in the sanding plate and the
sanding sheet coincide.
The fixture of the sanding disc takes place by means
of hook and loop adhesion.
GB
25
Publicité
