Publicité
6. Installation of the rear wheel
A. First, put the two rear axles through the body.
B. Install rear wheel (with the plum-shaped connector and motor) into the
rear axle, pad the gasket, and then lock it with M10 nut.
7. Rear wheel fixing
Snap the shock absorber shaft into the slot as shown in the diagram.
10
8. Installation of
windshield
Install the windshield
on the body in the
direction shown, and
lock it with three
M4X12 round head
screws.
9. Connect the battery
A. Unscrew the seat
screws and remove the
seat.
B. Connect the battery
connector.
11
Publicité
