Publicité
3. Installation of handlebar and steering shaft
A.Connect the wire (a) from the right handle to the wire (b) on the
body.
B. Insert the front fork into the steering shaft in the direction shown.
Fit the Ф12 gasket and the Ф8 gasket in turn, and then lock it with M8
nut to fix. Press the front fork cover.
08
4. Installation of
plum-shaped
connector
Install the plum-shaped
connector to the wheel
with three M4X12 round
head screws. All 4 rear
wheels need to be
installed.
5. Installation of the front wheel
First install Φ12 gasket, axle sleeve, front wheel in sequence into the
front axle, and pad the gasket, and then lock it with M10 nut.
09
Publicité
