Publicité
Footrest adjustment
To lower the footrest, press the buttons on either side of the footrest, then push
the footrest down. To raise the footrest, lift it up until you hear a characteristic
click (fig. 15).
Handle adjustment
Press the adjustment buttons to adjust the height of the handle.
Canopy Installation
1.
To correctly install the canopy, stand at the front of the fully unfolded stroller
with the canopy and ensure that the canopy's attachment components are
properly aligned (fig. 28).
2.
Attach the canopy brackets to the stroller frame, ensuring that the holes in
the attachments align with the rivet heads on the stroller frame.
3.
Extend the canopy (see: Canopy adjustment), secure it with the Velcro on
the sides to the stroller frame (fig. 29), and fasten the zipper located at the
back (fig. 30).
NOTE! Make sure that the canopy, along with its mechanism, is securely attached
to the top of the stroller.
Canopy adjustment
To adjust the canopy, simply slide it forward or backward and adjust as desired.
Backrest adjustment
Backrest adjustment: lift the lever on the back of the backrest and then adjust
the position of the backrest.
Headband removal
To remove the headband, press the release buttons (fig. 16) and then pull it out.
Correct insertion of the headband will signal a click (fig. 17).
Suspension hardness adjustment
The product has an option to adjust the hardness of the suspension. To do this,
lift the knob located at the rear of the stroller frame and slide it to the desired
value (fig. 18). Make sure to set the same value on both knobs to ensure that the
‑ 17 ‑
EN
Publicité
