Publicité
Switching on and off
– To start the tool turning, press the On/Off but-
ton (5).
– To switch the unit off, release the On/Off
switch [5].
Note: The revolution speed of the device
can be varied by applying different pres-
sures to the On/Off switch.
Drilling
DANGER! Risk of injury! Never hold the
work piece that you are working with in
your hand, on your lap, or against other
body parts.
NOTICE! Risk of damage to the unit!
Never use the drill for chasing or to
expand drilled holes.
– Turn the torque regulator (2) into position [
– Hold the device straight and drill with even pres-
sure.
Note: Always use a drill appropriate to the
material.
Screwdriver action
– Set the required torque using the torque regula-
tor (2).
Error/Fault
Device does not work.
Tool holder does not turn.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
].
Cause
Is the device defective?
Battery pack discharged?
Battery pack defective?
Is the rotation direction switch set
to the centre setting?
– Keep the device in a straight line to the screw.
Note: Always use the screw bit designed
for the screw. If you use the incorrect bit,
you may damage the head of the screw.
Cleaning
Cleaning and maintenance at a glance
Regularly and according to the operating condi-
tions
What?
Clean the ventilation slots
of the motor to remove
dust.
Clean the device.
Troubleshooting
What to do when something doesn't work...
DANGER! Exercise caution – risk of
injury! Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environ-
ment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Contact your local vendor.
► Charging the battery pack – p. 30.
Contact your local vendor.
► Changing the rotation direction –
p. 30.
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Part number
Battery-powered screwdriver
Idle revolutions
Max. torque
Max. drill chuck diameter
Noise output level (L
WA
Noise pressure level (L
GB
How?
Use a vacuum, cleaning
brush or paint brush.
Wipe the unit with a damp
cloth.
380526
0–350 /
-1
0–1300 min
25 Nm
10 mm
)*
83 dB(A)
(K = 5 dB(A))
)*
75 dB(A)
PA
(K = 5 dB(A))
31
Publicité
