Publicité
Annually
What?
Re-tension saw chain ► Re-tensioning the
Clean oil guide
groove of the saw bar.
Sharpen the saw
chain.
Cleaning
Cleaning the device
– Remove coarse dirt.
– Wipe down the device with a slightly
damp cloth.
Cleaning the oil guide groove of the saw
bar
– Remove the saw bar.
– Clean dirt from the oil guide groove of the
saw bar with a suitable tool. (plastic spat-
ula, do not use any steel tools!)
– Replace saw bar(► Assembling the saw
bar and saw chain – p. 57).
Re-tensioning the saw chain
► P. 5, fig. 6
– Lift the tip of the saw bar slightly.
– Tighten the tensioning screw for chain
tension (27) until the chain lies on the
underside of the saw bar.
Sharpening the saw chain
Special tools are required to sharpen the saw
chain; these guarantee that the cutting of the
chain occurs at the correct angle and the cor-
rect depth. We recommend that you have the
saw chain sharpened by a professional.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon
means: Batteries and rechargeable
batteries, electrical or electronic
devices must not be disposed of with
household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical
devices, spent portable batteries and
rechargeable batteries separately from
household waste at an official collection point
to ensure that these items are processed cor-
rectly. The product can be returned free of
charge in accordance with the legal require-
ments, for example through a municipal
waste disposal company or a dealer.
How?
saw chain – p. 61
► Cleaning the oil
guide groove of the
saw bar – p. 61
► Sharpening the
saw chain – p. 61
Batteries, rechargeable batteries and
lamps that are not permanently
installed in waste electrical equipment
and can be removed in a non-destruc-
tive way must be removed and disposed of
separately before disposal of the equipment.
Lithium batteries and rechargeable battery
packs of all systems are only to be handed in
to the waste collection points in a discharged
state. The batteries must always be protected
against short circuits by taping off the poles.
All end users are responsible for deleting any
personal data stored on waste devices prior
to their disposal.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked plastics
that can be recycled.
– Make these materials available
for recycling.
Technical data
Item number
Pruning saw
Idling speed
Length of the saw bar
Cutting speed
Oil tank capacity
Noise pressure level
(L
)*
PA
Sound power level (L
Vibration**
• Grip for front hand
• Grip for rear hand
Weight
Saw bar
Saw chain
Max. operating duration
with a full 2Ah battery
Hedge trimmer
Cutting length
Max. branch diameter
Stroke rate
Acoustic pressure (L
Acoustic power (L
WA
GB
304476
-1
1800 min
200 mm
4,5 m/s
100 ml
77,8 dB(A)
(K = 3 dB(A))
)* 87,8 dB(A)
WA
(K = 2,72 dB(A))
2,55 m/s²
2,48 m/s²
(K = 1,5 m/s²)
ca. 3,1 kg
Oregon
080SDEA041
Oregon
91PJ033X
50 min
410 mm
16 mm
−1
2400 min
)*
77,9 dB(A)
PA
(K = 3 dB(A))
)*
89 dB(A)
(K = 2,19 dB(A))
61
Publicité
