Publicité
Cleaning and maintenance overview
After each use
What?
Clean the device
Annually
What?
Re-tension saw chain ► Re-tensioning the
Clean oil guide
groove of the saw bar.
Sharpen the saw
chain.
Cleaning
Cleaning the device
– Remove coarse dirt.
– Wipe down the device with a slightly
damp cloth.
Cleaning the oil guide groove of the saw
bar
– Remove the saw bar.
– Clean dirt from the oil guide groove of the
saw bar with a suitable tool. (plastic spat-
ula, do not use any steel tools!)
– Replace saw bar(► Assembling the saw
bar and saw chain – p. 58).
Re-tensioning the saw chain
► P. 4, fig. 6
– Lift the tip of the saw bar slightly.
– Tighten the fastening nut (6) until the
chain lies on the underside of the saw bar.
Sharpening the saw chain
Special tools are required to sharpen the saw
chain; these guarantee that the cutting of the
chain occurs at the correct angle and the cor-
rect depth. We recommend that you have the
saw chain sharpened by a professional.
Fault/malfunction
Device does not work.
If you can't fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
How?
► Cleaning the de-
vice – p. 63
How?
saw chain – p. 63
► Cleaning the oil
guide groove of the
saw bar – p. 63
► Sharpening the
saw chain – p. 63
Cause
Battery not slotted in correctly?
Battery pack discharged?
Battery pack defective?
Is the device defective?
Storage and transport
Storage
DANGER! Risk of injury! Make
sure that unauthorized persons do
not have access to the device!
• Let the device cool down before you store
it.
• Store the device as horizontally as possi-
ble.
Longer downtimes
If you are not going to be using the device for
a while, remove the chain oil from the device.
Store the device in a dry place.
Transport
If you are transporting the device in a vehicle:
– Slip the protective cover onto the cutting
tool.
– Secure the device against slipping.
– If possible, use the original packaging for
dispatching.
Faults and remedial measures
When something isn't working...
DANGER! Risk of injury! Improp-
erly performed repairs can lead to the
device not functioning safely. This
endangers yourself and your environ-
ment.
Malfunctions are often caused by minor
faults. You can easily remedy most of these
yourself. Please consult the following table
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
Remedial measure
Slot battery into place.
► Charging the battery pack –
p. 59.
Contact your local vendor.
GB
63
Publicité
