Publicité
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
Fault/malfunction
Product not running.
No pressure or only low pres-
sure is built up.
Fastener is jammed.
If you can't fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
Disposal
Disposal of the appliance
This appliance must not be disposed of with
regular household waste! Dispose of the
appliance in the appropriate manner. For
more information, consult your community
waste disposal service.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked plastics
that can be recycled.
– Make these materials available
for recycling.
Technical data
Item number
Min. operating pressure
Max. operating pressure
Permissible operating tem-
perature
Connection thread
Air consumption
Sound power level (L
Sound pressure level (L
Vibration**
Weight
Cause
Device defective?
No pressure?
Lack of lubrication?
System contamination?
Leaks?
Is fastener twisted?
305591
0,35 MPa
0,5 MPa
−10 °C to
+70 °C
13,2 mm (G¼")
0,5 l/stroke
)* 90 dB(A)
WA
(K = 3 dB(A))
)* 77 dB(A)
PA
(K = 3 dB(A))
≤8,6 m/s²
(K = 1,5 m/s²)
0,87 kg
Remedy
Contact your local vendor.
Check pressure system, con-
nections and hoses.
Check the compressed air
maintenance unit.
Check connections, check
pressure system.
Check all connections and
hoses for tightness or clog-
ging.
Place new fastener (► Fill the
magazine – p. 26).
*)
The noise emission values indicated have been measured
according to a standardized test method and can be used to
compare one power tool with another. The noise emission val-
ues indicated can also be used for a preliminary assessment of
the exposure. Warning: The noise emissions during the actual
use of the power tool may differ from the indicated values,
depending on the way in which the power tool is used, in particu-
lar what type of workpiece is being machined. Safety measures
must be defined to protect the operator, based on an estimation
of the vibration load during actual conditions of use (taking into
consideration all parts of the operating cycle, such as time peri-
ods when the power tool is switched off and time periods when
it is switched on but running without a load).
Noise emission specifications according to the German Product
Safety Act (ProdSG) or the EC Machinery Directive: The sound
pressure level at the workplace may exceed 80 dB(A). If this is
the case, the user must take noise protection measures (e.g.
wearing appropriate hearing protection and taking regular
breaks).
**) The specified vibration emission value was measured in accord-
ance with a normed test procedure and can be used in order to
compare one tool with another. The specified vibration emission
value can also be used for an introductory evaluation of the
exposure. The vibration emission value may fluctuate from the
specified value during actual use of the power tool. These fluc-
tuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing
the vibration load is, for example, limiting the length of time you
work with the tool. All parts of the operating cycle must be taken
into account for this purpose (for example, also including times
in which the power tool is switched off and times in which it is
switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60745-1 &
EN 60745-2-13.
Usable fasteners
NOTICE! Risk of product damage!
Use only fasteners in the stated size
range.
Clamps
Item number
GB
101197,
101198,
101199,
101177
27
Publicité
