Publicité
ment parts will not only lead to an invalida-
tion of the warranty, they may also endan-
ger you and your environment.
Device-specific safety instructions
• When the product has been turned off,
always secure it to prevent accidental
switching on.
• Do not use devices if the On-Off switch is
not in proper working order.
• Keep the handles dry and free from
grease.
• Keep the work area clean and tidy when
working with the product.
• Make sure there is adequate lighting
when working with the product.
• Always hold the device firmly with both
hands.
• Keep supply lines and limbs away from
the tool.
• Make sure you are standing firmly and
that you have a natural posture when
working. This enables you to react better
to usual or unexpected reactions of the
device caused by backlash, blockage,
jamming, tool breakage or workpiece
breakthrough.
• Only use fault-free accessories suitable
and approved for the device. Incorrectly
fastened, damaged or worn tools can
cause intensive vibrations, by means of
which the device may become uncontrol-
lable. Loosening or breaking tools or
splinters thereof can cause injuries.
• The device is not suitable for operation in
potentially explosive atmospheres.
Sparks may occur during work, which may
ignite flammable liquids, gases, chippings
or dusts.
• Do not use the device for driving work,
during which you are for instance: on scaf-
foldings, stairs, ladders or ladder-like con-
structions, such as roof laths; closing
boxes or crates; fitting transportation lock
on vehicle and wagon.
• Use only fasteners approved by the man-
ufacturer.
• Never trigger the driving tool in open
space and do not manipulate the trigger
lock. Otherwise you risk injuring from fly-
ing fasteners and and overloading the
device.
• Pay attention to the workplace conditions.
Fasteners can penetrate thin workpieces
or slip off when you are working on edges
and corners and endanger people.
• Do not operate the device if other persons
without protective clothing are within
reach.
• Symbols appearing on your product may
not be removed or covered. Signs on the
product that are no longer legible must be
replaced immediately.
Read and observe the instructions
for use before using the product for
the first time.
Wear hearing protection.
Wear protective goggles.
Wear a dust mask.
Wear tightly fitting clothing.
Never use device on ladders.
Your product at a glance
Note: The actual appearance of your
device may differ from the illustra-
tions.
► P. 3, fig. 1
1. Air outlet
2. Shutter release button
3. Hose connection
4. Locking lever for magazine
5. Trigger lock
Scope of delivery
• Instructions for use
• Stapler
• Lubricating oil
• Staples 21 Ga. 12 mm (1000×)
16 mm (1000×)
• Allen key 3 mm
• Allen key 4 mm
Operation
Check before switching on!
Check the safe condition of the product:
• Check whether there are any visible
defects.
• Check all parts to make sure that they fit
tightly.
GB
25
Publicité
