Publicité
GB
• Check whether pressure has built up in
the compressed air system.
• Check whether the compress air connec-
tion and the pressure pipes are tight.
Compressed air supply
NOTICE! Risk of product damage!
Only operate the device with cleaned,
condensate-free and oil-atomised
compressed air.
• Fittings and hoses must be designed in
accordance with the pressure and the
required air quantity.
• Always use a compressed air mainte-
nance unit with a filter pressure reducer
and oil-mist lubricator.
– Plug the compressed air hose into the
plug-in coupling and allow to engage
firmly (► P. 3, fig. 2).
Fill the magazine
► P. 4, fig. 3
DANGER! Risk of injury! Before all
work on the device, disconnect the
compressed air supply.
The device can be operated only with clamps
(permissible size ranges: ► Usable fasten-
ers – p. 27).
– Unlock and open magazine with lever (4).
– Place fasteners as shown and close mag-
azine again. Fasteners are properly
places, if the magazine can be opened
without resistance.
Stapling
WARNING! Risk of injury! Risk of
rebound exists while driving in hard
materials and in case of longer fas-
teners.
Keep device sufficiently away from
the workpiece surface and replace
only then, when driving process is
desired.
NOTICE! Risk of product damage!
Use only fasteners approved by the
manufacturer.
Permissible size range: ► Usable
fasteners – p. 27
– Turn release lock (5) aside and press
release button (2).
26
Cleaning and maintenance
Cleaning and maintenance at a glance
Regularly, depending on the conditions of
use
What?
Clean the product.
Every 50 operating hours or every 3
months (more often when operating in
dusty environments)
What?
Lubricate the device. ► Fill with oil – p. 26
Maintenance
DANGER! Risk of injury! Before all
work on the device, disconnect the
compressed air supply.
Fill with oil
Note: For direct lubrication of the
device or for addition to the com-
pressed air maintenance unit we rec-
ommend motor oil SAE 10 or SAE 20.
– Regularly instil oil into the hose connec-
tion (3).
Remove jammed fasteners
► P. 4, fig. 3
– Unlock and open magazine with lever (4).
– Remove fastener.
– Close the magazine again.
Storage and transport
Storage
• Store the device and any accessories in a
dry, well-ventilated place.
• In case of longer periods without opera-
tion, protect the device and its accesso-
ries against soiling and corrosion.
Transport
• Use the original packaging to ship when-
ever possible.
Troubleshooting
If something stops working...
DANGER! Risk of injury! Improper
repairs can result in the product func-
tioning unsafely. This endangers
yourself and your environment.
Malfunctions are often caused by minor
faults. You can easily remedy most of these
yourself. Please consult the following table
How?
Wipe the device with
a slightly damp cloth.
How?
Publicité
