Publicité
Manually turn the panel ON/OFF
1.
When the heater is connected to power, the screen will
display (Figure 1).
2.
In the standby mode, short press the button ON/OFF
to turn on. Short press the power button again to turn
the heater off.
°C/°F Display
Press and hold button UP and DOWN for more than 1.5 seconds simultaneously to
convert Celsius/Fahrenheit or Fahrenheit/Celsius.
Heating mode
Short press button ON/OFF to turn the heater on. Use button DOWN and UP to set the
set temperature. Short press DOWN and UP to adjust this either up or down. After 8
seconds the heater will automatically save the setting if no other buttons are pressed.
When the set temperature is higher
than the room temperature, the
heating symbol
will be showing.
Heating symbol
Room
temperature
Set
temperature
Figure 1
Figure 2
49
Publicité
