Publicité
Cleaning information
1.
Ensure that the power supply to the towel rail is disconnected before any
installation or maintenance.
2.
Clean the device with a soft, non-abrasive, damp cloth while warm.
3.
Once the device has cooled, lightly polish with a soft, dry cloth.
4.
Do not use abrasive cleaning powders, metal polish, or chlorine-based
cleaners on any part of the device.
Installation
This appliance must be installed in accordance with the instructions in the
manual.
1. Screw the two screws "I" through the baffle "H" into the reserved holes on
the top of the device as show in the diagram below.
H
45
Publicité
