Publicité
GB
• MINUTE setting: Press [W.Timer] button 3rd
time, [
] would light on, press [-] [+] buttons to
set the Minutes from 00—59 (01 = 1 Minute, 02
= 2 Minute etc.)
– Set the time when the appliance stops operating.
• HOUR setting: Press [W.Timer] button 4th
times, [ ] would light on, press [-] [+] buttons
to set the Hours from 01–00 (01 = 1 o'clock, 02
= 2 o'clock... 00 = 24 o'clock etc.)
• MINUTE setting: Press [W.Timer] button 5th
times, [
] would light on, press [-] [+] buttons
to set the Minutes from 00–59 (01 = 1 Minute,
02 = 2 Minute etc.)
The above operations set the timer for Monday.
– Press [W.Timer] button one more time, [ ]
would light on, [2] showing on the display
means [Tuesday]. The operation for setting on
and off time is the same for each day.
– When 1-7 (1 = Monday, 2 = Tuesday... 7 = Sun-
day etc.) are all set, press [Delay] button on
remote control to select the day you need to set
the desired temperature and press [-] [+] buttons
to select the desired temperature, the tempera-
ture can be set from 10 °C to 49 °C.
PS: In weekly timer function, when you set the
desired temperature, the thermostat function would
operate as 4 Thermostat Instructions.
You can set different on and off time, and desired
temperature within a whole week.
Window Open Function
– Power on the appliance as any working modes, (It
can be fan, warm or hot mode). This function can
only be operated by the Remote control.
– Press [AUTO] button, the [ ] light would be on.
The appliance is working as a smart saving
energy mode (open window detection). In this
mode, the appliance measures and records ambi-
ent temperature. It would stop working, when the
ambient temperature drops more than 3 °C. The
user should restart the appliance by pressing [ ]
main button)
– Press [AUTO] button again, the [ ] light would
be off. Window Open Function is turned off.
Delay Function
This function can be used for two scenarios:
• When the appliance is in the standby mode
• Before the appliance is operating
This function can only be operated by the Remote
control.
1. Set the time left when the appliance starts operat-
ing.
– Press [Lock] button to switch on the LED dis-
play, then press [Delay] button one time,
The [
] and [ ] lights would be on. Press [-
] [+] buttons to set the Hours from 01–24 (01 =
1 o'clock, 24 = 24 o'clock... 00 = Closed etc.)
2. Set the time when the appliance stops operating.
Fault/malfunction
Product does not work or does not
heat.
24
PS: Press [Delay] button, the numbers showing on
the screen would flash. You should operate it in time,
otherwise the appliance would get back to standby
mode.
(This function is one-off and must be reset after the
appliance is powered off.)
Child-Lock Function
This function can only be operated by the Remote
control. When appliance is plugged in, this function
can be used in any modes.
– Press [Lock] button one time, all lights and LED
– Press [Lock] button again, all lights would be on
Defrost function operation
– Long press [ ] [ ]on the control panel for 3 sec-
– Press [ ] on the control panel or press [ ] on
Cleaning
– Switch off the device and let it cool off completely.
– Disconnect the mains plug.
– Wipe the device with a slightly damp cloth.
Troubleshooting
If something isn't working ...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
Is product switched off or adjusted
on ventilation with unheated air?
– Press [Delay] button again, the [
lights would be on. Press [-] [+] buttons to set
the Hours from 01–24 (01 = 1 o'clock, 24 = 24
o'clock... 00 = Closed etc.)
display would be closed, only [ ] light would be
on. In this condition, the operation for both control
panel and remote control would be invalid.
and the child-lock function is off.
onds or press [ ] on the remote control? The
screen would display [Fr] meaning that the
defrost function is turned on. When the product
detects ambient temperature is below 9°, the
appliance would blow warm air and both [ ]
and [ ] lights would be on. When the product
detects ambient temperature is higher than 11°,
the appliance would stop operating.
the remote control would switch off the defrost
function.
DANGER! Danger to Life! Always pull the
mains plug out before commencing any
work on the device.
NOTICE! Product damage! Never use
detergents or solvents for cleaning. This can
cause irreparable damage to the product.
The plastic parts can be eaten away by
chemicals.
DANGER! Risk of injury! Improper repairs
can result in the product functioning
unsafely. This endangers yourself and your
environment.
Remedy
Switch product on or set desired
heating power.
] and [ ]
Publicité
