Declaration Of Conformity - Sinmag Europe SE7L Mode D'emploi

ENG
Trouble and solution:
Trouble
Stirrer shaft doesn't work
after the mixer starts
Motor temperature is
overheating and rotating.
Speed slows down
Stirrer strikes on bowl
Warning:
If the equipment is out function, please make sure the equipment is serviced by a
professional person or turn to a special service point.

Declaration of conformity:

• Equipement type
• Model
• Number
6
Power line is connected
Reason
improperly
Fuse tube was blown
Voltage is too low
Overloaded
Improper stirrer is
mounted
Stirrer is deformed
SINMAG EUROPE BVBA
Check the plug
Solution
Replace the fuse with a new
one (5A)
Check voltage (240V)
Decrease materials
Choose a proper stirrer
Check and correct the
stirrer