Télécharger Imprimer la page

Electrolux KGV8473IK Notice D'utilisation page 26

Masquer les pouces Voir aussi pour KGV8473IK:

Publicité

Problem
-
come on.
comes on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send this
part (if applicable).
B. Stick it on Guarantee Card and keep this
part (if applicable).
26
ENGLISH
Possible cause
There is an error in the hob.
There is a dirt around burner area.
The thermocouple of the selected
burner is still too hot to allow the ig‐
nition of the burner to restart.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
Remedy
Disconnect the hob from the electri‐
cal supply for some time. Discon‐
nect the fuse from the electrical sys‐
tem of the house. Connect it again.
If
Authorised Service Centre.
Refer to "Care and cleaning".
Wait for the burner to ignite auto‐
matically.
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
8.3 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
SER.NO.
0049
C. Stick it on instruction booklet.
comes on again, speak to an
TYPE
IP20

Publicité

loading