Publicité
you wash the pan supports by hand and
dry them. If necessary, remove stubborn
stains with a paste cleaner.
3. After you clean the pan supports, make
sure that they are in correct positions.
4. For the burner to operate correctly, make
sure that the arms of the pan supports
are inserted in the recesses of the
enamelled plates.
7.3 Removing and assembling pan
supports
After cleaning of the hob, make sure that pan
supports are in a correct position. In order to
place a pan support properly, make sure that
its arms fits the grips placed at the base of
the burner as shown in the picture. This way,
a pan support is stable and fixed.
7.4 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, salt, sugar and food with sugar,
otherwise, the dirt can cause damage to
the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
the hob with a moist cloth and a non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
• To clean the enamelled parts, caps and
crowns, wash them with warm soapy
water and dry them carefully before you
put them back on.
7.5 Cleaning the flame spreader
You can wash the flame spreaders in a
dishwasher.
WARNING!
Let the flame spreaders cool down before
you clean them.
Light stains:
Wash the flame spreader with warm water
and soap and dry it with a soft cloth.
Medium stains:
Use the dishwasher. Place the flame
spreader on the bottom rack in a flat position,
with the top side up.
Heavy stains:
Clean the flame spreader with warm water
and soap, then wash it in the dishwasher. If
the stain is still present wash the top of the
flame spreader with a grill cleaner and run
through the dishwasher again.
Use a toothpick to clean the holes of the
flame spreader.
7.6 Cleaning the ignition candle and
the flame safety device
Keep the metal part of the ignition candle and
the flame safety device cleaned with a moist
cloth or sponge to prevent difficult lightning or
difficult flame recognition. Check if the burner
crown is not blocked with food residues.
7.7 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the conditions of
the gas supply pipe and the pressure
adjuster, if fitted.
ENGLISH
23
Publicité
