Publicité
7. CLEANING AND
MAINTENANCE
7.1 Warning
Turn your mains power
supply off and remove the
plug from the socket
before carrying out
maintenance and
cleaning of your machine.
Turn off the water supply
before starting
maintenance and
cleaning of your machine.
CAUTION:
solvents, abrasive
cleaners, glass cleaners
or all-purpose cleaning
agents to clean your
Washing Machine. They
may damage the plastic
surfaces and other
components with the
chemicals they contain.
Do not use
7.2 Water Inlet Filters
Water inlet filters prevent dirt and foreign
materials from entering your machine. We
recommend that these filters are cleaned
when your machine is unable to receive
sufficient water, although your water
supply is on and the tap is open. We
recommend that you clean your water inlet
filters every 2 months.
•
Unscrew the water inlet hose(s) from the
Washing Machine.
To remove the water inlet filter from the
•
water inlet valve, use a pair of long-
nosed pliers to gently pull on the plastic
bar in the filter.
A second water inlet filter is located in
•
the tap end of the water inlet hose. To
remove the second water inlet filter, use
a pair of long-nosed pliers to gently pull
on the plastic bar in the filter.
Clean the filter thoroughly with a soft
•
brush and wash with soapy water and
rinse thoroughly. Re-insert the filter by
gently pushing it back into place.
CAUTION:
water inlet valve may become clogged
due to water quality or lack of required
maintenance and may break down.
This may cause a water leak. Any such
breakdowns are out of the scope of the
warranty.
24
The filters at the
V.1
Publicité
