Télécharger Imprimer la page

Johnson GUADIANA80A Guide D'utilisation page 52

Publicité

(*)Machinery specifications may vary
depending on the product purchased.
5.7 Additional Functions
1. Temp.
Use the washing water temperature
adjustment button to alter the
automatically programmed washing water
temperature.
When you select a programme the
maximum temperature for that programme
is automatically selected. To adjust the
temperature, press the Temp. button until
the desired temperature is displayed on
the digital display.
You can gradually decrease the washing
water temperature between the maximum
washing water temperature of the selected
programme and cold washing (- - C)
selections by pressing the Temp. button.
2. Centrifug.
When you select a programme, the
maximum spin speed is automatically
selected.
To adjust the spin speed between the
maximum spin speed and the cancel
spinning option (- - -), press the Centrifug.
button until the desired speed is displayed.
If you have skipped the spin speed you
want to set, keep pressing the spin speed
adjustment button until the desired spin
speed is displayed again.
3. Inicio diferido/Início retardado
You can use this auxiliary function to delay
the start time of the washing cycle for 1 to
23 hours .
To use the delay function:
Press the delay key once.
"01h" will be displayed.
the electronic display.
Press the delay key until you reach the
time after which you want the machine to
start the washing cycle.
If you have skipped the delay time you
would like to set, you can keep pressing
the delay key until you reach that time
again.
To use the time delay function, you need
to press the Iniciar/Pausar key to start the
machine.
If you want to cancel the delay:
-
If you have pressed the Iniciar/Pausar
key to start the machine, you just
need to press the delay key once.
will go off on the electronic display.
-
If you have not pressed the Iniciar/
Pausar key, press the delay key
continuously until
electronic display.
electronic display.
NOTE
select the auxiliary function feature, if the
auxiliary function LED is not on, this means
that this feature is not being used in the
washing programme you have selected.
17
will light up on
goes off on the
will go off on the
: In the case that you want to
V.1

Publicité

loading