Publicité
Product description :
Heating pad :
1 - Output conduit
2 - Pet heating pad
3 - Flannel cover
4 - Controller
5 - Plug
6 - Anti-bite tube
Remote controller :
HOW TO USE IT ?
- Power On : Press the button 4, the default temperature of the digital tube displays is L03 : ~40°C
Temperature
-
setting : Press the button 6, adjust to relatively high temperature gear, press the
button 5 adjust to relatively low temperature gear. For example : The default temperature is L03 and
you want to adjust to L04, so you have to press the button 6.
- Save setting : after adjusting to the desired temperature, no additional operation is required , and
the settings are automatically saved after 3 seconds
- Temperature/time indicator light conversion : The default display shows the temperature. Press
button 7 to switch to the timer setting; the timer setting and its indicator light will be shown. When the
timer setting is displayed, press button 7 again to switch back to the temperature setting; the
temperature setting and its indicator light will be shown.
- Shutdown : In the power on state, press the button 4 to turn off the power and unplug the plug
- Timing setting : Press the 7 button, the default is 04H, 5 gear timing, respectively 04H (4 hours) /
08H (8 hours) etc...
HOW TO TEST IT ?
- Plug in the power, the power-on indicator turns red, you can sit on the heating pad, and within 15-30
,
minutes
you can feel the temperature.
1 - Time indicator
2 - Temperature indicator
3 - Display
4 - Power button
5 - Temperature time -
6 - Temperature time +
7 - Temperature/time switching
Publicité
