Publicité
Part name
1.Digital screen
2.Operation mode
button
3. Interface for
torch trigger
4. "-"Output
terminal
5.Current control
knob
6."+"Output
terminal
7.PILOT-ARC
1.Air reducer
valve
2.Cooling fan
3.Power switch
4.Cable
5. Air inlet nozzle
* For more detailed information about the machine installation and operation
guidelines, please visit arccaptain.com and explore the resources available there.
Function
To display the cutting
information
For 2T/4T cutting mode
conversion
To connect the control signal of
cutting torch
To connect the cutting torch
To adjust the output current/post
gas value
To connect the earth cable
To connect PILOT-ARC Line of
the cutting torch
To adjust the pressure of the
input air
For heat dissipation through
forced air cooling
To control the ON/OFF of the
input power of the machine
For power supply input
responsible for guiding and
regulating the compressed air
entering the machine
https://www.arccaptain.com/
Picture
Pic 3: Front panel controls
Pic 4:The back of the
machine
Publicité
