Télécharger Imprimer la page

Ribimex PRCOMP1/06SILR Manuel D'instructions Et D'utilisation page 17

Publicité

6.4- Storage
• Clean the product before storage.
• Keep the product, instruction manual and accessories (if any) in the original packaging.
• Store the product in a clean environment, where is not freezing or too hot (exceed 50 ̊ C ).
• Keep out of reach of children (e.g., lock it up).
6.5- Disposal
• Do not dispose with household garbage. Do not throw into the environment.
• Dispose of the product in a collection centre for waste of electrical and electronic
equipment, or a waste drop-off centre; or seek advice from your local municipality.
• Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
Our warranty conditions are available from our STAV department [*] and on our website.
Should you have any repair requests under the warranty, please contact your retailer or our STAV
[*] who will inform you on the procedure.
Should you have any parts and/or accessories request, you can contact our STAV [*] to ask for the
product exploded view by indicating our reference and the serial number or batch number
appearing on the nameplate.
[*] STAV = Technical and After-Sales Service department
STAV contact details:
Tel : 08 92 35 05 77 (0,34€/min ; only in France) ; email :
Internet Website:
www.ribimex.com
3. Incorrect output pressure
setting
Ribimex, 56 Route de Paris, F-77340 Pontault-Combault.
3. Check the pressure gauge (6) and
adjust the output pressure with regulator
(8), make sure the pressure meets the
requirement of the accessory.
sav@ribimex.fr
Page 17 / 28

Publicité

loading

Ce manuel est également adapté pour:

Prcomp2/50silrPrcomp3/100silr518381518391518401