WARNING! ELECTRIC HAZARD.
Disconnect from power source before cleaning, maintenance or any intervention on
the product.
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be missing
or damaged.
• Maintain good housekeeping and sufficient lighting in the working area.
• Keep children and bystanders away while operating this product.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
• Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away
from moving parts.
3.2- Additional safety rules for electric power tool
• When the tool is not in use or before performing cleaning, turn it off and disconnect from
main power source.
• Never leave the product running unattended.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Maintain labels and rating plate through the life of service.
• Do not use the power tool if the switch does not turn on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
• Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
• If the power cable is damaged, it must be replaced by the manufacturer, its after sales
service or a person with similar qualification in order to avoid any danger.
3.3- Special warnings when using these air compressors
• Use personal protective equipment. Always wear hearing protection when using the tool.
• To minimize the impact of emitted noise and vibration, limit the operation time and wear
appropriate personal protective equipment.
• Do not use the tools in any operations that beyond the intended purpose.
• Do not direct compressed air at yourself, other persons or animals.
• Do not insert your body parts (such as fingers) or other objects inside the motor housing to
avoid injury to yourself or damage to the compressor.
• The compressor should be used for air compression only. Do not use the compressor for any
other types of gas.
• The compressed air produced by the compressor may only be used for pharmaceutical, food
Page 12 / 28