Publicité
The Bushnell Pro X3+ does not need to be connected to the Bushnell Golf App to operate. Using the app makes adjusting
settings easier and the player can save games, stats and course information. See the screenshots below for some of the
features.
+
UPDATING FIRMWARE
To update the Pro X3+ firmware, click on Device Update on the Device Function screen in the Bushnell Golf Mobile app. If
there is an update available, it will automatically be downloaded and installed.
CLEANING AND GENERAL CARE
Your Bushnell Pro X3+ laser rangefinder lenses are fully multi-coated for the highest light transmission. However, care must
be taken in cleaning the lenses. Follow these tips for proper lens cleaning:
•
Blow away any dust or debris on the lens (or use a soft lens brush).
•
To remove dirt or fingerprints, clean with the supplied microfiber cloth rubbing in a circular motion. A coarse cloth
or unnecessary rubbing may scratch the lens surface and cause permanent damage. The included washable microfiber
cleaning cloth is ideal for routine optics cleaning. First, breathe lightly on the lens to provide slight moisture, then
gently rub the lens with the microfiber cloth.
•
For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol
may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.
•
The rangefinder is water-resistant but should not be exposed to heavy rain or other direct streams of water and will
not withstand submersion in water or other liquids.
CAUTION: Use caution to avoid direct sunlight into the eyepiece to prevent damage to the display/internal components. When using the BITE magnet to
attach the device to a cart bar or frame, tilt the device so the eyepiece aims towards the ground, not toward the sun. When you are not using the device,
please store it in the case for additional protection.
8
Click to Return to the Table of Contents
+
+
HoleView Screen
Publicité
