Publicité
USING THE WIND FEATURE
To get Wind Speed and Direction, the PRO X3+ needs to be in SLOPE Mode (link to turning slope on),
connected to the Bushnell Golf Mobile App (link to connecting to the mobile app), and have the Wind
feature set to on.
To turn the Wind Feature On in the PRO X3+ Set Up Menu:
1. Press and Hold the Mode Button on the top of the PRO X3+ to enter Set Up Mode
2. Press the Fire Button to move to the Wind Screen (see right)
3. Press Mode button to switch between ON and OFF
4. Press Fire button to select ON and continue pressing Fire/Power button to navigate out of Set
Up Mode
Note: The Pro X3+includes a digital compass which will need to be calibrate before use. A quick calibration of the digital
compass allows your PRO X3+ to accurately provide you with the best data possible every time! To assure accuracy,
simply run through the calibration step to refresh the digital compass calibration.
CALIBRATING THE DIGITAL COMPASS
When the DIGITAL COMPASS is not calibrated the arrows in the display will flash
and the PRO X3+ will vibrate while the display is on. To ensure you are getting the
most accurate wind data in your Pro X3+, a quick calibration is required to utilize
the wind feature. This is a quick, simple process of rotating the device in your
hand that can be done while walking to your ball.
BITE MAGNETIC MOUNT
The Pro X3+ features a powerful BITE magnet incorporated into the right side of its housing, which allows the device to be
securely attached to a golf cart bar or frame.
WARNING: BITE FEATURE INCLUDED WITH THE DEVICE CONTAINS A NEODYMIUM MAGNET. MAGNETS COULD
AFFECT THE FUNCTIONING OF PACEMAKERS AND IMPLANTED HEART DEFIBRILLATORS. IF YOU USE THESE
DEVICES, KEEP A SUFFICIENT DISTANCE FROM THE MAGNET. ALSO, WARN OTHERS WHO WEAR THESE DEVICES
FROM GETTING TOO CLOSE TO MAGNETS.
•
The magnet may permanently lose part of its adhesive force if exposed to
temperatures above 175º F (80º C).
•
Magnets produce a far-reaching, strong magnetic field. They could damage
TVs and laptops, computer hard drives, credit and ATM cards, data storage media,
mechanical watches, hearing aids, and speakers.
devices and objects that strong magnetic fields could damage.
•
Magnets have strong magnetic fields which can pinch skin and fingers. Use caution
when attaching the unit to a metal bar.
DISTANCE UNITS: YARDS OR METERS
To set the distance units between Yards or Meters, press Fire/Power to turn the unit on, then press and hold the Mode
button until the display is blinking. Press the Mode to switch from Y (yards) or M (meters). Press Fire/Power button to set
the distance units.
Note: If the Red Display is being used, the first setting is to adjust the Display Brightness. The second setting is to select the Distance Units. Follow the
instructions above to complete.
DUAL DISPLAY
To adjust the Dual Display from Black to Red, press the button on the left side of
the rangefinder.
Dual Display Button
6
Click to Return to the Table of Contents
Black Display
Keep the unit away from
Red Display
Scan QR code or click to
watch how to calibrate
the compass on ProX3+
Publicité
